A three component, metallic, zinc rich epoxy primer which passes Slip B coefficient. Interzinc 315B complies with SSPC Paint 20 and contains minimum 80% zinc in the dry film.The zinc dust used in Interzinc 315B conforms to ASTM D520, Type II.

Containing 80% zinc, Interzinc 52 is a high performance two component zinc-rich epoxy primer with excellent application properties. Interzinc 52 complies with SSPC Paint 20 Level 2 and has been designed to provide maximum protection as part of an anticorrosive coating system for steel in aggressive environments in both maintenance and new construction situations

Ceilcote 680M Primer/Saturant is a low viscosity, 85% volume solids epoxy compound based on a unique adduct curing technology. This provides tolerance of surface moisture at temperatures down to 2ºC (32ºF) and the ability to cure in the presence of moisture. The addition of Ceilcote C#1 Powder provides conductivity where required.

CEILCOTE 686C primer is a conductive epoxy primer for application on concrete surfaces. When used, it overcomes the variable resistance of the concrete substrate and provides a conductive film under CEILCOTE epoxy systems so that the system can be tested for holidays (pinholes) with a high voltage detector.

Containing 85% zinc, Interzinc 22 is an ideal zinc-rich silicate primer for steel in aggressive, corrosive environments. Rapid recoat technology allows faster throughput of coated steel, greatly enhancing productivity. Interzinc 22 conforms to SSPC Paint 20 Level 1 and ASTM D20 D520 Type II and can also be used as a tank lining for the carriage of different chemical cargoes.

The fast drying and handling properties of Intergard 251 coupled with extended overcoatability make this an excellent primer for factory application prior to full system application on site. Intergard 251 is a two component anticorrosive zinc phosphate epoxy primer for use in both new construction and industrial maintenance for a wide range of anti-corrosive coatings systems.

A low VOC, inorganic zinc-rich ethyl silicate based primer providing outstanding corrosion protection for properly prepared steel surfaces. Contains 82% zinc dust in the dry film for long term corrosion protection.

A fast drying, heavy duty, inorganic zinc primer for all high performance coating systems designed to protect steel structures in severe service. Meets SSPC Paint 20 requirements.

Two component solvent based inorganic zinc rich ethyl silicate based primer.Meets SSPC Paint 20 requirements.

Devran 223 is a rust inhibitive primer for interior or exterior steel surfaces. It is an excellent holding primer with superior aged recoatability.