47 ProductsShare product selection
Bar-Rust 233H LV
A low VOC, high performance, multi-purpose, surface tolerant, two-component chemically-cured epoxy semi-gloss coating.
Bar-Rust 234P is a thick-film, 100% solids, proprietary formulated epoxy based low temperature cure tank lining.
Ceilcote 222HB Flakeline
Ceilcote 222HB is designed for use on FGD duct linings, tanks, trenches and pits, vaults and dikes, secondary containment and floors.
Ceilcote 282HB Flakeline
Ceilcote 282HB Flakeline has excellent resistance to hot flue gas environments. The coating system can achieve a dry film thickness of up to 1350 microns (54 mils) in a single coat with or without the use of a primer. The intent is to eliminate one application step where similar coating systems require two seperate applications.
Ceilcote 389 Hybricrete
CEILCOTE 389 Hybricrete is a revolutionary, new, high performance system designed to provide exceptional resistance to aggressive chemicals such as methylene chloride, acetone, methanol, nitric acid and n-methylpyrrolidone.
Ceilcote 505M FDA Coroline
The CEILCOTE 505M FDA Coroline is a 1/8" nominal thickness epoxy lining containing graded silica filler and reinforced with one layer of heavy glass fabric. It is an established, proven chemical-resistant epoxy lining, designed for use as either a lining for metal or concrete surfaces or as a corrosion resistant floor topping.
Ceilcote 64 Lining
CEILCOTE 64 Lining is a heavy-duty lining that protects steel and concrete in immersion service from strong chemicals. The lining is formulated from polyester resin, inert fillers, and fiberglass reinforcement. It can withstand solution temperatures to 160°F (71°C) in immersion service.
Ceilcote 68 Lining
Ceilcote 68 Lining is a fibreglass reinforced, toughened epoxy lining system developed for protection of concrete and steel surfaces that are subjected to immersion and corrosive chemical environments.
A high solids, one coat, chemical resistant lining system with exceptional resistance to a wide range of chemicals and solvents.
Devmat 100 is a thick-film, 100% solids reinforced, proprietary formulated epoxy-based internal lining.