The new Intergard 251HS and Intergard 2575

International

Intergard 2575 and Intergard 251HS are two component, corrosion resistant epoxy primers. Intergard 2575 and Intergard 251HS can increase your productivity reduce cost and waste and provide lower VOC emissions.  This epoxy primer range is suitable for steel construction in atmospheric environments.

Intergard 251HS Extended Recoat Epoxy Primer

  • Contains zinc phosphate for corrosion resistance
  • Re-coatable up to 12 months with itself or polyurethanes
  • Faster dry and shorter minimum recoat (compared with Intergard 251)\
  • Wider dry film (DFT) range (compared with Intergard 251)
  • Spray straight from the can after mixing, with no need to thin
  • Formulated below 250 g/L
  • Shares colored converters with Intergard 2575 for max color availability

Intergard 2575 Rapid Recoat Epoxy Primer with MIO

  • Contains zinc phosphate and Micaceous Iron Oxide (MIO) for corrosion resistance
  • Re-coatable up to 12 months with itself or polyurethanes
  • Wider dry film thickness range (compared with Intercure 200HS)
  • Much faster cure speed at lower temps (compared to Intercure 200HS)
  • Spray straight from the can after mixing, with no need to thin
  • Formulated below 250 g/L
  • Shares colored converters with Intergard 251HS for max color availability
Click here for more information







 
Interthane 990V Low VOC Polyurethane

Akzonobel has launched Interthane 990V, a new polyurethane finish with a volatile organic compound (VOC) level below 250 grams per liter. The new product meets tighter standards recently introduced in Utah and those expected in many Northeast states in coming months. Several California Air Districts already require 250 grams per liter for industrial manufacturing coatings. 

Click here for more information






 

Enviroline 2405 Low VOC, High Temp Lining

Enviroline® 2405 offers outstanding long term chemical and corrosion protection to crude and petroleum bulk storage tanks, process vessels, secondary containment and the internal and external lining for buried transmission pipelines.

Our high performance Enviroline® 2405 is suitable for use with both standard airless and plural component spray equipment to allow for easy installation of a full linings system in a single coat. No additional thinning or heating of the material is needed with Enviroline® 2405 which helps reduce application costs. Productivity is further enhanced with return to service times in as little as 48 hours at 77 degrees F.

The ultra-low VOC formulation (98% solids) assists in reducing solvent emissions, which aids in VOC legislative compliance.

Click here for more information





 

Enviroline 405HTR Glass Reinforced Lining

Excellence refined — building on the technology platform of Enviroline 405HT. The next generation Enviroline 405HTR brings several important performance improvements to the oil and gas customer. Be sure and visit the resource section below for more details.
  • Multiple temperature range applications
  • Added reinforcement and flake fiber additives
  • Improved chemical resistance properties
  • Improved application properties
  • Low VOC and high solids formulation
 









 

Polibrid 705E Elastomeric Polyurethane

Polibrid 705E — 100% solids, solventless, odorless, elastomeric polyurethane coating. Provides corrosion protection for steel and concrete suitable for numerous immersion, chemical, abrasion and impact
resistant applications 
  •    Solvent free and Zero VOC
  •    High film thickness in a single coat (5mm+ if required)
  •    Fast curing/low temperature curing
  •    Extremely low Moisture Transmission Rate
  •    Flexible, elastic, crack resistant, abrasion and chemical resistant
  •    Suitable for steel and concrete substrates




 

Intercure 4500 Polyaspartic

Intercure 4500 is specially formulated to provide rapid cure and reduced coats to aid throughput in fabrication and Original Equipment Manufacturing (OEM) environments. Intercure is based on polyaspartic resin technology.
  • Rapid Cure even at low temperatures
  • Ease of application 
  • Productivity and time savings
  • Improved handling times
  • Reduced need for shop heating and forced drying
  • Reduces the number of coats
  • Low VOC emissions
  • Color retention/UV resistance








 

Contact us

We are here to help

Our global team of technical and sales experts are available to provide you with the help and support that you need.

contact avatar image
team image

We have a team of experts to each industry, who understands your business and objectives.

expertise image

Benefit from our continuous innovation and scientific expertise.

support image

Our coating advisors all around the world assist you with your technical support and questions.