We are a single source supplier of coatings for wind turbines - from tip to toe.
60 ProductsShare product selection
A highly crosslinked, two component, high build epoxy phenolic coating, Intertherm 228HS combines properties of corrosion and chemical resistance when used in high temperature service. Based upon novolac resin technology, Intertherm 228HS can be used in a wide range of highly corrosive environments operating at temperatures up to 230°C (446°F).
A single component, high temperature coating based on a moisture-curing silicone binder, Intertherm 50 is ideal for the protection of steel from corrosion at temperatures up to 540°C (1004°F). The moisture-curing crosslinking technology of Intertherm 50 allows multiple coats to be applied without heat curing.
An innovative, high build, ‘cold spray’ applied coating, Intertherm 751CSA is based on titanium modified inorganic copolymer technology. Capable of providing corrosion protection, Intertherm 751CSA is a high performance coating applied using standard application equipment curing effectively at ambient temperatures.
A single component, temperature resistant finish coating, Intertherm 875 is based on silicone and acrylic resins with thermally stable pigmentation. Intertherm 875 does not require heating between coats and it is suitable for steelwork operating at temperatures up to 260°C (500°F) in a wide range of industrial environments.
Containing 85% zinc, Interzinc 22 is an ideal zinc-rich silicate primer for steel in aggressive, corrosive environments. Rapid recoat technology allows faster throughput of coated steel, greatly enhancing productivity.
Containing 80% zinc, Interzinc 52 is a high performance two component zinc-rich epoxy primer with excellent application properties.
With proven track record spanning over 30 years, low VOC Interzone 1000 is a high build, two component epoxy coating pigmented with lamellar glass flake. Interzone 1000 extends asset lifetime by providing outstanding abrasion and corrosion resistance to steelwork located in the harshest offshore environments.
An ultra-high build, high volume solids, two component catalysed epoxy, Interzone 485 is ideal for the long term protection of steelwork in severe environments where high abrasion and corrosion resistance are required.
A high solids, low VOC, high build glass flake epoxy, Interzone 505 is a tough, fast drying primer that provides excellent long term anticorrosive and abrasion protection. Interzone 505 is designed for the protection of steelwork in severe corrosive environments, such as splash zones, pilings and chemical plants.
With an extensive global track record spanning over 25 years, Interzone 954 is a high solids two component modified epoxy ideal for protecting and maintaining steel structures in the most severe environments.