Water and Waste

Product Applications

Long term corrosion protection to the steel and concrete used in the Water and Wastewater market.

Filter by

Product Chemistry

Volume Solids

VOC(EPA Solvent)

Gloss Level

Number of Components

Attributes

Fire Type

Certifications

Fire Duration (minutes)

Water and Waste

Mining

Transportation and Pipeline

Buildings

Wind Power

Thermal Power

Onshore Oil and Gas facilities

Offshore Oil and Gasfacilities

Product Line

Range

Dry time

Low temperature Cure (5 Celsius)

Lining

134 Products

Interthane 990HS

Product Type
Finish
Chemistry
Polyurethane

A low VOC, two component acrylic polyurethane high performance finish coat with excellent gloss and colour retention on exterior exposure, for use over correctly prepared primed surfaces.

Interthane 870UHS

Product Type
Finish
Chemistry
Polyurethane

A low VOC, high build, semi-gloss urethane finish with excellent gloss and colour retention on exterior exposure, for use over correctly prepared and primed surfaces.The VOC is below 250 g/l to conform to local VOC regulations.

Ceilcote 505 Coroline

Product Type
Chemical Resistant Lining
Chemistry
Epoxy

A heavy duty epoxy system with proven chemical resistance for use over metal or concrete surfaces.

Ceilcote 252 Flakeline

Product Type
Chemical Resistant Lining
Chemistry
Polyester

CEILCOTE 252 FLAKELINE coating is a flake glass filled, catalyzed polyester system which exhibits excellent resistance to acids, salts, alkalis and many organic solvents.

Enviroline 125LV

Product Type
Lining
Chemistry
Epoxy

An ultra high solids two component epoxy lining system.

Enviroline B-Flex 9400TR

Product Type
Lining
Chemistry
Epoxy Novolac Polysulphide

A solvent free, two component polysulphide lining system utilising advanced epoxy novolac technology.

Intercrete 4872 (formerly Cemprotec 200-S)

Product Type
NOT TRANSLATED
Chemistry
No translation found - Flexible Waterproof Sealing Tape - eng-usa

Specifically designed be embedded in the INTERCRETE range of cementitious coatings to provide a highly flexible impermeable seal over ‘live’ cracks and expansion or construction joints in waterproofing applications. Intercrete 4872 is a permanently elastomeric composite tape exhibiting over 600% elongation which enables rapid application of the INTERCRETE range. Provides excellent weathering resistance and is highly tolerant of a wide range of chemicals and is impermeable to water under 10 bar hydrostatic pressure (100m head of water).

Intercrete 4854 (formerly Cemprotec EF Grit)

Product Type
Structural Concrete: Repair and Protection
Chemistry
Aggregate

Specifically designed to be broadcast into the surface of INTERCRETE coatings to aid curing and provide a durable slip and abrasion resistant finish. INTERCRETE 4854 grit provides a hard-wearing, slip-resistant surface which will provide ultimate protection against foot traffic, wheelchair use, impact from heavy objects and attack from the elements.

Intercrete 4874 (formerly Cemprotec 2000-BJT)

Product Type
Structural Concrete: Repair and Protection
Chemistry
No translation found - Flexible Waterproof Sealing Tape - eng-usa

Supplied as a 100mm wide preformed strip on siliconised release paper, the backing strip is simply removed upon application. Non-toxic and approved for use in contact with potable water, Intercrete 4874 is ideal for use in a wide range of waterproofing applications, such as reservoirs, water tanks, roof slab and projects in enclosed locations where it is not suitable to use solvent-based or hot welded products

Intercrete 4875 (formerly Cemprotec Scrim)

Product Type
Structural Concrete: Repair and Protection
Chemistry
No translation found - Flexible Waterproof Sealing Tape - eng-usa

Supplied in two grades for the reinforcement of the Flexcrete range of cementitious mortars and coatings: INTERCRETE SCRIM: Particularly suited for general reinforcement over large areas of cracking/crazing or weak/friable substrates, particularly insulation, to provide increased tensile strength and impact resistance. INTERCRETE EDGE SCRIM: For localised reinforcement over joints or cracks to provide increased tensile strength. Can also be used over welds or edges of steel sections to help maintain correct film thickness. Self-adhesive.

Pages