Long term corrosion protection to the steel and concrete used in the Water and Wastewater market.
Intergard 475HS is a low VOC, high solids, high build epoxy used to improve barrier protection for a range of anticorrosive coating systems in a wide range of aggressive environments. Intergard 475HS can be pigmented with MIO to provide improved overcoating properties, better facilitating application in the fabrication shop.
A premium solvent-free epoxy phenolic tank lining, Interline 984 is formulated with ease of application at the forefront. Wide ranging resistance allows for multiple end uses to be covered by the same product, saving time during specification. Excellent flow and levelling properties enhance pit filling characteristics, making it the ideal lining for refurbishing tanks. Interline 984 is also available in a conductive version, Interline 984C, which is compliant with DIBt regulations.
A two component, high solids, low VOC, rapid curing metallic zinc rich epoxy primer which complies with the composition and performance requirements of SSPC Paint 20.
Containing 80% zinc, Interzinc 52 is a high performance two component zinc-rich epoxy primer with excellent application properties. Interzinc 52 complies with SSPC Paint 20 Level 2 and has been designed to provide maximum protection as part of an anticorrosive coating system for steel in aggressive environments in both maintenance and new construction situations
A high solids, low VOC, two component, high build, surface tolerant epoxy coating, Interseal 670HS provides excellent anticorrosive protection in industrial and offshore environments in both atmospheric exposure and immersion service. Interseal 670HS is suitable for application to a wide range of substrates and aged coatings.
Ceilcote 680M Primer/Saturant is a low viscosity, 85% volume solids epoxy compound based on a unique adduct curing technology. This provides tolerance of surface moisture at temperatures down to 2ºC (32ºF) and the ability to cure in the presence of moisture. The addition of Ceilcote C#1 Powder provides conductivity where required.
CEILCOTE 242 LSE Flakeline coating is a low surface energy, flake filled, catalyzed vinyl ester system with excellent resistance to organic and inorganic acid solutions and many aliphatic solvents.
CEILCOTE 400MP COROCRETE is a fast setting cementitious repair mortar designed for use in repairing vertical surfaces and small repair areas. Based on the latest concrete technology and high quality raw materials, this mortar yields a long lasting, high strength, durable concrete repair where long down times cannot be tolerated. CEILCOTE 400MP Corocrete can be applied on vertical, overhead or horizontal surfaces.
Ceilcote 610 Ceilpatch is a chemical-resistant epoxy patching/filling compound that is used to fill defects in concrete or steel surfaces prior to the application of Ceilcote lining, coating or flooring systems. It provides excellent adhesion to concrete or steel, minimal shrinkage and superior chemical resistance.
CEILCOTE 748 Corrosion Grout is a three-component chemicalresistant epoxy grouting material. It provides high strength, good adhesion to concrete and steel, minimal shrinkage and resists degradation by corrosive chemicals.
Corrosion & fire protection coatings for buildings
Coatings for abrasive and corrosive environments