We offer a wide range of high performance coatings that provide long term corrosion protection and aesthetics
The CEILCOTE 6400 Ceilcrete Series are time-tested and proven developments in chemical-resistant surfacing. They are designed especially for the protection of concrete and steel against the attack of corrosive chemicals. They provide excellent resistance to strong oxidizing acid solutions such as nitric, sulfuric and chromic. CEILCOTE 6400 Ceilcrete Series are trowel applied, in combination with a heavy-duty reinforcing layer of fiberglass or synthetic cloth.
Ceilcote 652 Lining is a trowel applied heavy duty lining that protects steel and concrete in immersion service from strong chemicals. The lining is formulated from novolac vinyl ester resin, inerts fillers and fibreglass reinforcement.It is a chemical resistant lining for most dilute inorganic acids and come concentrated acids such as hydrochloric and phosphoric.
Ceilcote 680 Primer is a low viscosity epoxy primer for steel and concrete, with low temperature cure and a degree of tolerance to surface moisture.
Ceilcote 680M Primer/Saturant is a low viscosity, 85% volume solids epoxy compound based on a unique adduct curing technology. This provides tolerance of surface moisture at temperatures down to 2ºC (32ºF) and the ability to cure in the presence of moisture. The addition of Ceilcote C#1 Powder provides conductivity where required.
CEILCOTE 748 Corrosion Grout is a three-component chemicalresistant epoxy grouting material. It provides high strength, good adhesion to concrete and steel, minimal shrinkage and resists degradation by corrosive chemicals.
The CEILCOTE 810 Corocrete floor system is designed with heavy duty, epoxy novolac surface texture material. Abrasive grits are broadcast into the resin matrix to provide traction, textured finish, durability and wear. The flooring system is designed for resisting attack by aggressive chemicals such as concentrated sulfuric acid. Unique Novolac technology permits the extended working time of the CEILCOTE 810 Corocrete floor, making it user friendly, resulting in easier application and reduced waste.
Ceilcote Ceilline Horizontal and Ceilcote Ceilline Vertical are two component elastomeric epoxy systems with excellent flexibility and resistance to crack bridging on concrete surfaces.
CEILCOTE EJ10 is a two part rubberised asphalt compound designed for sealing joints and cracks in concrete, and as an expansion joint for Ceilcote floors. It is recommended for dilute acid and alkaline solutions, but is known to resist strong solutions of some chemicals. It is available in a pourable version and a trowelable version.
Ceilcote EJ3 is a two component, pourable polysulfide elastomer designed for use in applications requiring a chemical resistant sealant for horizontal joints. Ceilcote EJ4 is trowel grade, for use on vertical and overhead surfaces. When cured Ceilcote EJ3/EJ4 forms a tight fitting synthetic rubber compound to effectively seal out water and many aggressive chemical solutions
Protecting wind turbines from tip-to-toe
Corrosion & fire protection coatings for buildings