Onshore Oil and Gas Facilities

Product Applications

Our extensive product range is designed to increase service life and minimize unplanned shutdowns.

Filter by

Product Chemistry

Volume Solids

VOC(EPA Solvent)

Gloss Level

Number of Components

Attributes

Fire Type

Certifications

Fire Duration (minutes)

Water and Waste

Mining

Transportation and Pipeline

Buildings

Wind Power

Thermal Power

Onshore Oil and Gas facilities

Offshore Oil and Gasfacilities

Product Line

Range

Dry time

Low temperature Cure (5 Celsius)

Lining

207 Products

Intergard 475HS

Product Type
Intermediate
Chemistry
Epoxy

Intergard 475HS is a low VOC, high solids, high build epoxy used to improve barrier protection for a range of anticorrosive coating systems in a wide range of aggressive environments. Intergard 475HS can be pigmented with MIO to provide improved overcoating properties, better facilitating application in the fabrication shop.

Interline 984

Product Type
Lining
Chemistry
Epoxy Phenolic

A premium solvent-free epoxy phenolic tank lining, Interline 984 is formulated with ease of application at the forefront. Wide ranging resistance allows for multiple end uses to be covered by the same product, saving time during specification. Excellent flow and levelling properties enhance pit filling characteristics, making it the ideal lining for refurbishing tanks. Interline 984 is also available in a conductive version, Interline 984C, which is compliant with DIBt regulations.

Interchar 212

Product Type
Passive Fire Protection
Chemistry
Epoxy Intumescent

Solvent-free Interchar 212 is a high build, robust, two component modified epoxy intumescent providing damage resistant fire and corrosion protection for the most demanding construction projects. Interchar 212 has excellent mechanical and physical properties, all backed up by rigorous third party testing and approvals.

Interzinc 52HS

Product Type
Primer
Chemistry
Epoxy Zinc-Rich

A two component, high solids, low VOC, rapid curing metallic zinc rich epoxy primer which complies with the composition and performance requirements of SSPC Paint 20.

Interzinc 315B

Product Type
Primer
Chemistry
Epoxy Zinc-Rich

A three component, metallic, zinc rich epoxy primer which passes Slip B coefficient. Interzinc 315B complies with SSPC Paint 20 and contains minimum 80% zinc in the dry film.The zinc dust used in Interzinc 315B conforms to ASTM D520, Type II.

Interzinc 52

Product Type
Primer
Chemistry
Epoxy Zinc-Rich

Containing 80% zinc, Interzinc 52 is a high performance two component zinc-rich epoxy primer with excellent application properties. Interzinc 52 complies with SSPC Paint 20 Level 2 and has been designed to provide maximum protection as part of an anticorrosive coating system for steel in aggressive environments in both maintenance and new construction situations

Interseal 670HS

Product Type
Surface Tolerant
Chemistry
Surface Tolerant Epoxy

A high solids, low VOC, two component, high build, surface tolerant epoxy coating, Interseal 670HS provides excellent anticorrosive protection in industrial and offshore environments in both atmospheric exposure and immersion service. Interseal 670HS is suitable for application to a wide range of substrates and aged coatings.

Ceilcote Ceilline

Product Type
Aggregate
Chemistry
Elastomeric Epoxy

Ceilcote Ceilline Horizontal and Ceilcote Ceilline Vertical are two component elastomeric epoxy systems with excellent flexibility and resistance to crack bridging on concrete surfaces.

Ceilcote EJ-4

Product Type
Reference
Chemistry
Unknown

Ceilcote EJ3 is a two component, pourable polysulfide elastomer designed for use in applications requiring a chemical resistant sealant for horizontal joints. Ceilcote EJ4 is trowel grade, for use on vertical and overhead surfaces. When cured Ceilcote EJ3/EJ4 forms a tight fitting synthetic rubber compound to effectively seal out water and many aggressive chemical solutions

Ceilcote 680M

Product Type
Primer
Chemistry
Epoxy

Ceilcote 680M Primer/Saturant is a low viscosity, 85% volume solids epoxy compound based on a unique adduct curing technology. This provides tolerance of surface moisture at temperatures down to 2ºC (32ºF) and the ability to cure in the presence of moisture. The addition of Ceilcote C#1 Powder provides conductivity where required.

Pages