We offer a complete coating solution range for the most demanding offshore environments around the world.
Intergard 475HS is a low VOC, high solids, high build epoxy used to improve barrier protection for a range of anticorrosive coating systems in a wide range of aggressive environments. Intergard 475HS can be pigmented with MIO to provide improved overcoating properties, better facilitating application in the fabrication shop.
A premium solvent-free epoxy phenolic tank lining, Interline 984 is formulated with ease of application at the forefront. Wide ranging resistance allows for multiple end uses to be covered by the same product, saving time during specification. Excellent flow and levelling properties enhance pit filling characteristics, making it the ideal lining for refurbishing tanks. Interline 984 is also available in a conductive version, Interline 984C, which is compliant with DIBt regulations.
Solvent-free Interchar 212 is a high build, robust, two component modified epoxy intumescent providing damage resistant fire and corrosion protection for the most demanding construction projects. Interchar 212 has excellent mechanical and physical properties, all backed up by rigorous third party testing and approvals.
A two component, high solids, low VOC, rapid curing metallic zinc rich epoxy primer which complies with the composition and performance requirements of SSPC Paint 20.
A three component, metallic, zinc rich epoxy primer which passes Slip B coefficient. Interzinc 315B complies with SSPC Paint 20 and contains minimum 80% zinc in the dry film.The zinc dust used in Interzinc 315B conforms to ASTM D520, Type II.
Containing 80% zinc, Interzinc 52 is a high performance two component zinc-rich epoxy primer with excellent application properties. Interzinc 52 complies with SSPC Paint 20 Level 2 and has been designed to provide maximum protection as part of an anticorrosive coating system for steel in aggressive environments in both maintenance and new construction situations
A high solids, low VOC, two component, high build, surface tolerant epoxy coating, Interseal 670HS provides excellent anticorrosive protection in industrial and offshore environments in both atmospheric exposure and immersion service. Interseal 670HS is suitable for application to a wide range of substrates and aged coatings.
Ceilcote EJ3 is a two component, pourable polysulfide elastomer designed for use in applications requiring a chemical resistant sealant for horizontal joints. Ceilcote EJ4 is trowel grade, for use on vertical and overhead surfaces. When cured Ceilcote EJ3/EJ4 forms a tight fitting synthetic rubber compound to effectively seal out water and many aggressive chemical solutions
Ceilcote 680M Primer/Saturant is a low viscosity, 85% volume solids epoxy compound based on a unique adduct curing technology. This provides tolerance of surface moisture at temperatures down to 2ºC (32ºF) and the ability to cure in the presence of moisture. The addition of Ceilcote C#1 Powder provides conductivity where required.
Ceilcote 242AR Flakeline is a flake-filled, corrosion and abrasion resistant lining system.
Coatings & fire protection for upstream oil & gas
Coatings & fire protection for downstream oil & gas
Protecting wind turbines from tip-to-toe