Mining

Product Applications

With an extensive track record, our coatings are proven to extend the design life of the production facilities and improve cash flow due to less downtime.

Filter by

Product Chemistry

Volume Solids

VOC(EPA Solvent)

Gloss Level

Number of Components

Attributes

Fire Type

Certifications

Fire Duration (minutes)

Water and Waste

Mining

Transportation and Pipeline

Buildings

Wind Power

Thermal Power

Onshore Oil and Gas facilities

Offshore Oil and Gasfacilities

Product Line

Range

Dry time

Low temperature Cure (5 Celsius)

100 Products

Pre-Prime 167

Product Type
Primer
Chemistry
Epoxy

A high performance, two-component chemically-cured 100% solids epoxy penetrating sealer.

Interthane 990HS

Product Type
Cosmetic Finishes

A low VOC, two component acrylic polyurethane high performance finish coat with excellent gloss and colour retention on exterior exposure, for use over correctly prepared primed surfaces.

Intersleek 381

Product Type
No translation found - Foul Release Coatings - eng-usa

A two component silicone elastomer tie coat.

Intercrete 4872 (formerly Cemprotec 200-S)

Product Type
NOT TRANSLATED
Chemistry
No translation found - Flexible Waterproof Sealing Tape - eng-usa

Specifically designed be embedded in the INTERCRETE range of cementitious coatings to provide a highly flexible impermeable seal over ‘live’ cracks and expansion or construction joints in waterproofing applications. Intercrete 4872 is a permanently elastomeric composite tape exhibiting over 600% elongation which enables rapid application of the INTERCRETE range. Provides excellent weathering resistance and is highly tolerant of a wide range of chemicals and is impermeable to water under 10 bar hydrostatic pressure (100m head of water).

Intercrete 4854 (formerly Cemprotec EF Grit)

Product Type
Structural Concrete: Repair and Protection
Chemistry
Aggregate

Specifically designed to be broadcast into the surface of INTERCRETE coatings to aid curing and provide a durable slip and abrasion resistant finish. INTERCRETE 4854 grit provides a hard-wearing, slip-resistant surface which will provide ultimate protection against foot traffic, wheelchair use, impact from heavy objects and attack from the elements.

Intercrete 4874 (formerly Cemprotec 2000-BJT)

Product Type
Structural Concrete: Repair and Protection
Chemistry
No translation found - Flexible Waterproof Sealing Tape - eng-usa

Supplied as a 100mm wide preformed strip on siliconised release paper, the backing strip is simply removed upon application. Non-toxic and approved for use in contact with potable water, Intercrete 4874 is ideal for use in a wide range of waterproofing applications, such as reservoirs, water tanks, roof slab and projects in enclosed locations where it is not suitable to use solvent-based or hot welded products

Intercrete 4875 (formerly Cemprotec Scrim)

Product Type
Structural Concrete: Repair and Protection
Chemistry
No translation found - Flexible Waterproof Sealing Tape - eng-usa

Supplied in two grades for the reinforcement of the Flexcrete range of cementitious mortars and coatings: INTERCRETE SCRIM: Particularly suited for general reinforcement over large areas of cracking/crazing or weak/friable substrates, particularly insulation, to provide increased tensile strength and impact resistance. INTERCRETE EDGE SCRIM: For localised reinforcement over joints or cracks to provide increased tensile strength. Can also be used over welds or edges of steel sections to help maintain correct film thickness. Self-adhesive.

Intercrete 4873 (formerly Cemprotec GE080)

Product Type
Structural Concrete: Repair and Protection
Chemistry
No translation found - Mat Fibre Reinforcement - eng-usa

Specifically designed as a general reinforcement for elastomeric cementitious coatings such as Intercrete 4842, particularly on roofs or other areas of cracked concrete where further movement is possible. It provides additional toughness to the film whilst still maintaining a high degree of flexibility

Intercrete 4878 (formerly Cemprotec Flex-Tape)

Product Type
Structural Concrete: Repair and Protection
Chemistry
No translation found - Flexible Waterproof Sealing Tape - eng-usa

Specially designed for easy embedment in the Intercrete range of decorative protective coatings to ensure continuity of a seamless finish over cracks or joints, and at junctions between dissimilar substrates. Available in two grades, the Light Duty grade may be used to cover static cracks and joints, whereas for larger cracks and joints which are subject to movement, Heavy Duty grade is recommended. By introducing Intercrete 4878 into the applied membrane, a fully waterproof and permanently flexible finish is assured. Intercrete 4878 is non-degrading and is suitable for both internal and external applications.

Intercrete 4876 (formerly Cemprotec GFM 100 / GFM 225)

Product Type
Structural Concrete: Repair and Protection
Chemistry
No translation found - Mat Fibre Reinforcement - eng-usa

Supplied in two grades for the reinforcement of the Intercrete range of fluid applied membranes. It is particularly suited for the reinforcement of Intercrete 4845 used in pitched and flat roof waterproofing where it greatly enhances tensile strength and tear resistance to increase cohesive strength of the composite membrane to accommodate cracks in roofing substrates. It is also used to reinforce membranes in situations where a multi-crazed or cracked substrate must be treated, or where there is a need to provide an additional defence against mechanical damage in high traffic environments.

Pages